5
Setting the IP Address
Once the IP camera is installed, you need to set the IP address from a computer. By default, all Nextiva IP
cameras are Dynamic Host Configuration Protocol (DHCP) enabled. If you have a DHCP server, the IP
camera automatically obtains a valid IP configuration. If the DHCP configuration fails, the IP camera assigns
itself a temporary IP address based on the Automatic Private IP Addressing (APIPA) format.
►
To configure SConfigurator:
1. On a computer, download the latest version of SConfigurator from
www.verint.com/manuals
.
2. Extract the executable file (
SConfigurator.exe
) to the desktop.
3. Double-click
SConfigurator.exe
to start SConfigurator.
4. In the
General
tab, click
Program Options
.
5. Select the IP address of the correct LAN interface from
IP Address of the PC
list.
6. Select
Detect All Units on LAN
.
7. Ensure that the
Discovery IP Address
is 255.255.255.255; otherwise, click
Broadcast
.
8. In the S5100 Authentication section, type the username and password for the Nextiva IP camera.
NOTE:
The default username and password for the Nextiva S5100 is admin.
9. Click
OK
.
►
To set the IP address of an IP camera in DHCP mode:
1. Open SConfigurator.
2. Select the
Units
tab, then click
Discover
. In a DHCP environment, the Address column displays the IP
address assigned by a DHCP server.
3. Select the Nextiva IP camera model, and click
Configure
.
4. In the tree view, expand the
Network
node and click
IP
.
