Nextiva S4100 Series
Installation Guide
www.verint.com/manuals
3
© 2007-2009 Verint Systems Inc. All Rights Reserved Worldwide.
2. In the General tab, click Program Options.
3. In the IP Address of the PC list, select 172.16.23.1. If it does not
appear in the list, it may be because you did not temporarily change
the IP address of your computer.
4. Ensure that the VSIP Port is 5510; otherwise, click Default.
5. Ensure that the Discovery IP Address is 255.255.255.255;
otherwise, click Reset to Broadcast.
6. Click OK.
7. Select the Units tab, then click Discover.
To provide the initial parameters:
1. Select the S4100-R device, then click Configure.
2. Click Quick Setup.
3. In the Unit Name boxes, provide a meaningful name for the devices.
4. In the Country box, select the country of operation of the pair of
devices. Assign the proper country to comply to the DFS/TPC
regulations, if applicable, to respect the maximum EIRP, and to use
the proper set of frequency channels.
5. Ensure that the Repeater Mode value is Disabled.
