10
MENU FUNCTIONS:
5.
Installation Mode:
Press “
▲
”or “
▼
” key to choose installation mode, and
press “OK” or MODE key to confirm and enter into the Installation Mode
interface, which can set installation mode, guide line, brake light mode,
backup priority.
A: Installation:
Press “
◄
” or”
►
“ key to choose normal or down install
then press “OKR or” MODE” key to confirm, monitor take effect by reboot.
Normal as default.
B: Guide line:
Press “
◄
” or”
►
“ key to choose OFF or CH1 to CH4, choose
the Guide Line on which channel then which will have guide line when
reversing. If choose OFF then there are no guide line for all channels. Off
as default.
C: Brake Light Mode:
Press “
◄
” or”
►
“ key to choose OFF or CH1 to CH4.
If you chose more than 1 channel, then once trigger one of the chosen
channels, the monitor will display all the chosen channels’ images. For
example, if you choose CH1 and CH2, then once trigger CH1 or CH2, the
monitor will display both CH1 and CH2’s image at the same time. OFF as
default.
D: Backup Priority:
Press “
◄
” or”
►
“ key to choose OFF or CH1 to CH4.
Selecting which channel then which will have trigger priority. For example:
when you choose CH1, then once CH1 and other channels triggered at the
same time, the monitor will just display CH1 ‘s image. OFF as default.
6.
Automatic Brightness:
Press “
▲
”or “
▼
” key to choose automatic
brightness, and press OK or “MODE” key to confirm then press “
◄
” or”
►
“
key again to choose on or off. When you turn on this function, the screen’s
brightness will be down 50% at night mode. Off as default.
7.
Time Display:
Press “
▲
”or “
▼
” key to choose time display, and press “OK”
or “MODE” key to ccnfirm, then press “
▲
”or “
▼
” key again to choose on or
off. If you chose OFF, then the time display on the screen will be appeared.
On as default.
8.
Display Mode:
press “
▲
”or “
▼
” key to choose display mode, and press
“OK” or “MODE” key to enter into this interface setting, which has
background color, border color, display mode.
Background colour:
press
“
◄
” or”
►
“ key to choose black or blue, and press “OK” or “MODE” key
to confirm. Choose one of the colors as background color when there is
no signal input. Black as default.
Border Colour:
press “
◄
” or”
►
“ key to
choose white, red, green, yellow or OFF and press “OK” or MODE key to
confirm. Choose one of the colors as the preview interface border color.
OFF as default.
Display Mode:
press “
◄
” or”
►
“ key to choose display
mode and press OK’’ or “MODE” key to confirm.
