5. Preparing the camera
5.1.
Opening and closing the camera
Operating buttons, connections and batteries are located inside the Wildlife Camera.
To open the camera undo the two lateral locking brackets as shown in Fig. 1.
To lock the camera again, engage metal hoops of locking brackets into mount and press down plastic
tab of bracket (Fig. 2).
A fixing for a padlock is provideed between the two locking brackets, allowing the camera to be securely
locked.
5.2.
Inserting the batteries
Open the camera as described in section 6.1 to insert the
batteries. The battery compartment is housed in the right,
rear part of the camera. Now open the protective cover of the
battery compartment by pulling the clamping closure at the
top slightly inwards before lifting off the cover.
First remove any existing batteries from the battery compartment. Insert 4 or 8 fully charge batteries as
shown in the below figure. When inserting batteries ensure correct position as marked for each battery
in the battery compartment.
Fig. 1.
Fig. 2.
10
