(MENU 02) Squelch Level
Squelch Level is about when the signal is strong enough to turn on the squelch.
You can hear the voice from other radios only when the squelch is turned on.
Higher Level makes it harder to receive the weak signals, while Lower Level will be
interfered by noises and/or unwanted signal. (Default Level: 05)
To set the Squelch Level : Enter MENU 02,
screen display
"Sq"
(MENU 03) Setting and Transmitting Call Tones
Your radio can transmit different call tones to other radios in your
group so you can alert them that you want to talk. You have 10 call
tones from which to choose.
To set a call tone : Enter MENU 03,
screen display
"CA"
To transmit your call tone to other radios, please set radios to the same
channel and same CTCSS/DCS Code and then Press and Hold
Button.
(MENU 04) Roger Beep
You can set your radio to transmit a unique tone when you finish
transmitting. It is like saying “Roger” or “Over” to let others know
you are finished talking.
To turn ON/OFF the
Roger Beep
: Enter MENU 04,
screen display
"ro"
(MENU 05) Transmit (TX) Power Level Selection
To set the Transmit Power Level: Enter MENU 05,
screen display
"Po"
HI=High Power Lo=Low Power
Note : For some countries, the Power Level
Selection is Disabled
according to local regulations.
