8
General Operation
PLAY/PAUSE
Press to start playing the CD disc.
Press again to temporarily stop playing the CD.
Press again to resume playback.
SKIP + and
Press to go to the next track or back to the previous track.
SKIP -
Press and hold while playing until you find the point of sound.
STOP
Press to stop all CD operation.
Playback
1. Set the
“FUNCTION”
selector to CD mode.
2. Open the CD door and place a CD disc with the label side up into the CD compartment.
3. Close the CD door.
4. A focus search is performed on the inserted CD disc. The total number of tracks is read and
appears on the display.
5. Press the “
PLAY/PAUSE”
button to start playing the CD disc.
6. Adjust the
“VOLUME”
control to the desired level
.
7.
Press the
“PLAY/PAUSE”
button again when you want to stop playback temporarily.
8. Press the
“STOP”
button when finished.
Program
Up to 20 tracks can be programmed for disc play in any order. Be sure to press the
“STOP”
button
before use.
1. Press the
“PROGRAM”
button, the display will show
“01”
and flash.
2. press the desired track by using the
“SKIP +”
or
“SKIP -”
button.
3. Press the
“PROGRAM”
button again to confirm the desired track into the program memory.
4. Repeat steps 2 and 3 to enter additional tracks into the program memory.
5. When all the desired tracks have been programmed, press the
“PLAY/PAUSE”
button
to begin playing the disc in the order you have programmed it. The program indicator
light will start flashing.
6. Press the
“STOP”
button twice to terminate the programmed play.
The program indicator light stops flashing.
Repeat
Press the
“REPEAT”
button before or during CD play.
A single track or all tracks can be repeated.
Each press switches the repeat mode as follows;
1- REPEAT 1 (The repeat indicator is flashing.)
2- REPEAT ALL (The repeat indicator is constantly on.)
3- NORMAL PLAYBACK.
CD Operation