www.nextcenturymeters.com
V. 052521
6| Programming & Verification
6.1 – Serial Number
Scan the barcode using the NCSS Mobile App or using a barcode
scanner into the NextCentury website.
6.2 – Verify Communication
The Test Connect button can be pressed to verify
communication with the Gateway. Two green blinks indicate
that the Repeater has established two-way communication.
10| Television and Radio Interference
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
The FCC requires the user to be notified that any changes or
modifications made to this device that are not expressly approved by
Company Name may void the user’s authority to operate the equipment.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your
body.
As per 47 CFR §15.19
(All other devices shall bear the following statement in a conspicuous
location on the device:
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
As per 47 CFR §15.21
The user’s manual or instruction manual for an intentional or
unintentional radiator shall caution the user that changes or
modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment. In
cases where the manual is provided only in a form other than paper, such
as on a computer disk or over the Internet, the information required by
this section may be included in the manual in that alternative form,
provided the user can reasonably be expected to have the capability to
access information in that form.
ISED Statement
This radio transmitter (identify the device by certification number) has been
approved by Industry Canada to operate with the antenna types listed below
with the maximum permissible gain indicated. Antenna types not included in
this list, having a gain greater than the maximum gain indicated for that type,
are strictly prohibited for use with this device.
Immediately following the above notice, the manufacturer shall provide
a list of all antenna types approved for use with the transmitter,
indicating the maximum permissible antenna gain (in dBi).
8.4 User Manual Notice for Licence-Exempt Radio Apparatus
User manuals for license-exempt radio apparatus shall contain the
following text, or an equivalent notice that shall be displayed in a
conspicuous location, either in the user manual or on the device, or both:
This device complies with Innovation, Science and Economic Development
Canada’s licence-exempt RSSs. Operation is subject to the following two
conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Cet appareil est conforme aux flux RSS exemptés de licence
d'Innovation, Science et Développement économique Canada.
L'opération est soumise aux deux conditions suivantes:
(1) Cet appareil ne doit pas provoquer d'interférence; et
(2) Cet appareil doit accepter toute interférence, y compris les
interférences susceptibles de provoquer un fonctionnement indésirable
de l'appareil.
ISEDC Radiation Exposure Statement
[English] Radiation Exposure Statement: This equipment complies with
the IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a
minimum distance of 20 cm between the radiator and your body.
[French] Énoncé d'exposition aux rayonnements: Cet équipement est
conforme aux limites d'exposition aux rayonnements ioniques RSS-102
Pour un environnement incontrôlé. Cet équipement doit être installé et
