LS4
Water Sensing Cables
Targeted Cable
Rope Cable
Water sensing Rope Cables or Targeted Cables are installed in the area
where you would like water to be detected. Up to 3 cables can be daisy-
chained together expanding the leak detection area.
The Rope Cable can be used when a larger leak detection area is desired.
This cable type can detect water along its full length:
Install with contact points
touching the floor.
Use the included
screws to secure.
Additional Rope or Targeted Cables
can be daisy-chained at the end.
Ensure the cable is secure and
won’t be accidentally snagged or
moved out of place.
Additional Targeted or
Rope Cables can be
connected.
The Targeted Cable can detect standing water at a single point. It can be
installed at the base of a wall or on the floor. A leak will be detected if water
pools to this spot.
