NextBase SDV485-B, Руководство по эксплуатации

Страница: 56 / 62

ENG
MOBILE ENTERTAINMENT
55
F
M
t
r
a
n
s
m
it
t
e
r
:ENT
FM
F M : 8 7 . 6 - - 1 0 7 . 9 M H Z
0 8 7. 6 M HZ
:SEL :-/+
1. Press ADJUST button to enter the adjustments of brightness, color, TFT mode,
view mode, FM transmitter and IR transmitter.
2. Use the / buttons on the main unit board or / buttons on the remote
control to choose FM transmitter, then press enter button.
3. Use the / buttons to choose ON , then press enter button to enter
frequency input mode.
4. There are two frequency input modes: one is to input numbers directly; the other is
to increase or decrease frequencies by the direction buttons. By pressing the
/ buttons to change the place number inputted, while the / buttons to
decrease and increase frequency number.
5. The input frequency range is from 87.6-107.9MHZ. The default is OFF.
6. If the input number is out of the range of 87.6-107.9MHZ the frequency will be
displayed in cycles from the beginning.
7. Press ENTER button to save the choice after selecting the preferable frequency
within the permissible range. Then the player will transmit audio signal according
to this frequency. Choose OFF to turn off the FM function.
8. Adjust your receiving set (eg. car stereo) to the corresponding frequency to
receive the transmitted audio signal from the player.
9. The transmission range will be within approximately 3 meters.
" "
" "
" "
FM TRANSMITTER
FM
OFF O N : 8 7 . 6 M H Z
:ENT
FM TRANSMITTER INSTRUCTIONS