NextBase NBDVR202, Инструкция по эксплуатации

Страница: 12 / 24

PHOTO MODE
1. Photo Mode Icon: Indicates the iN-CAR CAM is in Photo mode.
2. Capture Mode Icon: Displayed on screen when Capture Mode (timer) is selected from within the
Photo menu.
3. Anti-Shaking Icon: Displayed on screen when the Anti-Shaking enhancement has been enabled
from within the Photo menu.
4. Sequence Icon: Displayed on screen when the Sequence function has been selected from within
the Photo menu, the iN-CAR CAM will automatically take five pictures when OK is pressed.
5. Image Count: Displays number of images that can be stored on the memory card based on
current image quality settings.
6. Resolution: Displays the current resolution as set within the Photo menu.
7. Quality: Displays the current image quality as set within the Photo menu.
8. Memory Card Icon: Icon will be marked with a red cross when there is no memory card inserted.
9. Battery Indicator: Displays battery level, it is recommended to keep the car adaptor plugged in
during use, the indicator will flash during charging.
10. ISO Icon: Displays the current ISO setting as selected within the Photo menu.
11. White Balance Icon: Displays the current White Balance setting as selected within the Photo
menu.
12. Exposure Icon: Displays current exposure setting as selected from within the Photo menu.
The Photo menu is accessed by using the MENU button located on the rear of the iN-CAR CAM, use
the UP and DOWN buttons to navigate through the Menu and press the OK button to enter the
options screen. Select the required setting and press OK to confirm, press MENU once more to exit
the Photo Menu.
The default settings within the iN-CAR CAM have been set to allow you to use the iN-CAR CAM
without the need to change any settings, however it is recommended that you explore these settings
to familiarise yourself with the product and it’s capabilities.
Note:
- Within the SETUP menu which is accessed from within any mode by pressing the MENU button
twice, there is a ‘Default Setting’ option to allow you to reset the iN-CAR CAM to the factory defaults
if required.
The key below explains the various information displayed on the screen when your iN-CAR CAM is in
Photo mode, some icons will only be displayed once the relevant function has been selected within
the Photo menu, as described further down this page.
01234
5M
ISO
AUTO
0
+
-
AWB
2
2
))
12
5
2
6
11
10
1 3 4
7
8
9
12