NextBase 512G Ultra, Инструкция по эксплуатации

Страница: 15 / 44

VIDEO MODE (CONTD.)
Video settings menu
The Video settings menu is accessed by pressing the menu button whilst in Video mode. Use the up
and down buttons to highlight settings and press the OK button to enter the options screen.
Select the required option and press OK to confirm, press menu once more to exit.
Note:
- Menus are not accessible during recording.
1. Resolution
Select recording resolution, this will increase or decrease the quality of the recorded video.
Default Setting: 1080P
2. Record Audio
Turn On / Off audio recording.
Default Setting: On
3. Date Stamp
Turn On / Off the date stamp shown on recorded files.
Default Setting: On
4. Speed Stamp
Turn On / Off the Speed Stamp shown on recorded files.
Default Setting: On
5. GPS Stamp
Turn On / Off both the GPS co-ordinates and speed stamp that are shown on recorded files.
When a recording is viewed using the NEXTBASE Replay both the GPS co-ordinates
and speed information remains available.
Default Setting: On
Note:
- Turning the GPS Stamp to OFF will result in the loss of ALL information being recorded to
the video file and is therefore NOT recommended.
6. NEXTBASE Stamp
Turn On / Off the NEXTBASE Stamp shown on recorded files.
Default Setting: On
7. Number Plate
Enter the registration number for your vehicle, this will then be shown on the video file.
8. G Sensor
Turn Off or adjust the sensitivity of the G Sensor, it is the G Sensor that detects forces which
will automatically protect the current recording in event of a collision.
Default Setting: Middle
9. Exposure
Select exposure, used to adjust exposure level for different light conditions.
Default Setting: 0
10. White Balance
Adjust the white balance for different light conditions.
Default Setting: Auto
15