LOCATION AND FUNCTION OF CONTROLS
SPECIFICATIONS
GENERAL
Supply Voltage
DC 12V. Negative Ground
Current Consumption
Max.15A
Power Output
40W X 4 (Measured at DC 14.4V)
Unit Dimensions
178[W] X 165[D] X 50[H] mm.
FM SECTION
Frequency range
87.5MHz – 107.9MHz
Effective sensitivity
3uV.
I.F Frequency
10.7MHz.
AM SECTION
Frequency range
530KHz – 1710KHz
Effective sensitivity
40dB.
I.F Frequency
450KHz
RCA LINE OUT
1. RELEASE BUTTON
Output
CD Max. 1200mV
Press this button to eject the front control panel from the main body.
CD PLAYER
System
Compact Disc Audio System
2, 3 & 4. SEL BUTTON (Select) AND VOLUME (MENU) UP (+) / DN (
–
) BUTTONS
Suitable CDs
CD, CD-R, CD-RW Disc
a) Press the SEL button briefly to select each of the following modes:
Signal format
Sampling frequency 44.1KHz
VOLUME - > BASS - > TREBLE - > BALANCE - > FADER - >
No. of quantization bits 1bit
When the desired audio mode is selected, press the + or – button to adjust the
Frequency characteristics
20Hz – 100Hz < 5dB
value of that audio effect.
10KHz – 20KHz < 5dB.
In each mode you have about 3 seconds to make your changes before the
S/N Ratio to CD
50dB [1KHz]
display returns to the tuner (radio) or CDP mode.
Number of channels
2 STEREO channels.
The different audio modes display the following numeric ranges:
- VOL : (MIN) 0 , 0 1 , . . . ...49, 63 (MAX) .
- BASS / TREB: - 7 , - 6 , . . . , 0 , . . . + 6 , + 7
- BAL : 1 0 L , 9 L , . . . , 0 , . . . 9 R , 1 0 R
- FAD : 1 0 F, 9 F, . . . , 0 , . . . 9 R , 1 0 R
Note: If you preselect a preset EQ (Preset Equalizer Curves), you cannot
change the BASS and TREBLE values.
b) Press the SEL button and hold it for more than 2 seconds to access the menu
mode. Now press the SEL button briefly to select from the following options:
EQ (OFF / FLAT / CLASS / ROCK / POP ) - > BEEP ON / OFF - > SEEK 1 / 2 - >
12 H / 24 H - > VOL LAST / ADJ .
DSP SETTINGS:
In EQ mode you can select from the equalizer settings DSP OFF, FLAT, CLASS,
ROCK and POP by pressing the + and – buttons.
BEEP ON / OFF :
Turn the confirmation beep on or off by pressing the + or – button .
BEEP ON: The confirmation beep can be heard whenever a button is pressed.
BEEP OFF: The confirmation beep is switched off.
Page 9
Page 2
Содержание NCD60C
Страница 1: ...CAR STEREO WITH CD PLAYER NCD60C...
