2 - CONNECTION DIAGRAMS
This control unit can manage 1, 2, 3 or 4 lines of single-colour LED strip lights. By default, operation is set to
two single-colour strip lights. If a different strip type is used, follow the paragraph 3 procedure.
RECOMMENDATIONS
•
Installation must be carried out only by professional technicians in accordance with the applicable electrical and
safety regulations.
•
All connections shall be operated without electrical voltage.
•
Use proper cables.
•
Don’t cut the antenna
•
Provide in the power line twith an appropriate disconnection device
•
Dispose of waste materials in full compliance with local law.
•
Do not exceed the specified load limits and use correctly protected power supplies.
2.1 SINGLE-COLOR CONNECTION DIAGRAM
The control unit is set by default to manage two lines of single-colour strip lights.
To change the setting, follow the procedure in paragraph 3.
Power supply
12/24Vdc
Single-color
LED
WARNING:
•
Connect up to 5A per output and max total 10A
•
The outputs are synchronized
Button
USE VIA WIRE
SHORT PRESS:
On-Off for all lights
LONG PRESS:
Up/down dimmer for all lights
4
-
+
(1) (2)
(9) (10)
-
+
(3) (4)
- -
-
(5) (6)
+
(7) (8)
OUT 1
+ OUT 1-2
+ OUT 3-4
OUT 2
OUT 3
OUT 4
C
P
