1. Attach 2 x centre support legs 5 to centre rail
4 with 4 x bolts (B), 4 x washers (D) and 4 x nuts
(E), tighten using a screwdriver.
2. Attach centre rail 4 to headboard 1 and
footboard 2 with 4 x bolts (A1), 4 x spring
washers (C) and 4 x washers (D), tighten using
Allen key (H). If required re-adjust the bolts
tightened in STEP TWO.
1. Insert all slats 7 through the gaps in 2 x slat
2. Attach slat caps (F) onto each slat down one
side on each of the slat assemblies.
1. Attach double sided slat caps onto the other
ends of each slat assembly and connect
together to form the bed base.
NOTE: Ensure the curve of the slats are facing
upwards.
STEP FOUR
STEP FIVE
STEP THREE
Page 3 of 5
