5mm
7 of 9
Attach plastic ends (H) and (J) to slats (7).
•
IMPORTANT
Once the feet have been assembled and attached, they should be adjusted to ensure
they do not touch the floor, (5mm above the floor) to allow for movement once the
mattress is placed on the bed frame.
It is important to note that when moving the bed that it is not dragged into its new
position to prevent the possibility of these feet being twisted or angled to one side,
which could lead to the collapse of the centre of the bed.
To move the bed, remove the mattress and lift the bed into its new position to avoid
damage.
Ensure the feet are at 90 to the floor before replacing the mattress.
5
7
Hx28
7
Jx14
H
Step Seven
Step Eight
