1.Slide panels 21(x2) into the grooves of the drawer
frame.
1.Insert 4 × cambolts (A) into panels 16 & 17 and using a
screwdriver until tight.
2. Glue (E) and insert 4 x wooden dowels (D) into panels
18 (x2) & 19 (x2) and attach panels 16 & 17 to panels 18
(x2) & 19 (x2).
3. Insert 4 x camlocks (B) into panels 18 (x2) & 19 (x2)
and tighten with a screwdriver.
Ensure the arrow indicator is pointing towards the panel
edge and ensure the assembly bolt locates properly into
the camlock before turning
STEP THREE
STEP TWO
Un
fin
ish
ed
s
id
e
the camlock before turning
1.Insert 5 × cambolts (A) into panels 4, 5 & 6 and using a
screwdriver until tight.
2. Attach push & out (H) on panel 5 with 2 x screws(H)
provided on pre-drill hole position as shown in diagram.
3. once push & out (H) are correctly adjusted then
fasten with 2 x screws(H) on the remaining holes in the
push & out (H) .
STEP FOUR
Page 3 of 10
