1. Insert a sprung wooden slat 6 through the first
hole in strap 10. Repeat using another sprung
wooden slat 6 and the other strap 10.
2. Attach single sided slat cap 7 onto one end of the
sprung wooden slat 6. Attach another single sided
slat cap 7 onto the other end of the second sprung
wooden slat 6.
3. Attach both sprung wooden slats to the
assembled bed base by inserting each single sided
slat cap 7 into side rails 3 (x2) and using double
sided slat cap 8 in the centre. Once each slat has
been inserted into the slat caps, ensure the double
sided slat cap is firmly pushed into the holes in
4. Repeat process for all remaining slats and caps
until all components have been used and firmly
pushed in place.
1. Attach finials 11 X 4 to headboard 1 and footboard
2 turning clockwise by hand to tighten.
STEP SIX
STEP SEVEN
Next Retail Ltd, Desford Road, Leicester, LE19 4AT
Page 5 of 5
