HUNTINGDON GLAZED DRESSER
174728
Assembly instructions
BEFORE YOU START
Produced in Lithuania for Next Retail Ltd.
Warnings
We sugest you retain these instructions for future reference.
Keep fittings out of children's reach and keep children well away
from the construction area.
This product should only be used on firm, level ground.
Please periodically check all fittings and re-tighten as necessary.
Please do not sit or stand on your furniture.
Avoid exposing the furniture to excessive heat or direct sunlight as
this can cause deterioration of the colour.
Products with shelves will be delivered with ‘X’ shaped plastic
holding clips to prevent them from moving in transit. These should
be removed
Do's
We suggest you spend a short time reading through this leaflet
before you start.
When you are ready to start, make sure that you have the right
tools and plenty of space.
Unwrap all packaging materials and place the components on a
clean surface to protect it from damage.
We recommend that the packaging is used to protect the surfaces
during assembly.
Carefully check that you have all the parts before beginning
assembly.
Due to the size of the product we recommend that it is assembled
in the room intended for use.
Ensure the product is fully assembled as illustrated and all fixings
are fully tightened before use.
Wipe occasionally with a soft cloth slightly dampened with water.
The buff with a dry clean soft cloth.
Wood will mellow and change colour over time, we recommend that
ornaments and items placed on the surface are moved regularly for
the first few months to prevent uneven mellowing.
Magnetic door catches can be manually adjusted to increase or
decrease the force required to open doors,by turning the magnet
Don'ts
Do not drag or pull your furniture.
Do not use sillicone based furniture polish. Sillicone in furniture
polishes can break down the finish.
Never allow any kind of liquid to remain on your furniture.
Absorption can cause wood to warp or finishes to de-laminate.
Do not place hot items (e.g. hot drinks) directly on to the wood
surface. Please make sure you use a placement or coaster.
PRODUCT SUPPLIED WITH WALL FIXING STRAPS
Number of people required to assemble
Two persons are required to assemble this item.
Time to assemble
30min
Tools to required
.
Care information
It is recommended to re-oil 1-2 times a year using standard
furniture oil (e.g. Tung oil). Firstly carry out
The sanding process as described above and then dampen a lint
free cloth with the furniture oil and rub into the wood in the
direction of the grain (always trial on an unseen face first to
ensure the colour is acceptable).
Several coats may be applied to the surface to increase the
quality of finish and give more protection to the timber. Note:
After oiling it may be necessary to ventilate the room in order to
remove any smell of oil.
In very dry environments it may be necessary to re-oil the
furniture more frequently
The surface may appear to become rough and dry over time –
this is normal and can easily be treated by lightly sanding the
surface using fine sandpaper (i.e. no. 320 grit sand paper) in the
direction of the grain
Missing parts
If you are missing any fixtures and fittings for you product
please contact our customer service team on 0333 777 8999 and
they will be happy to arrange for a replacement to be sent to you
free of charge.
Home service technicians
If you have a fault with your product please contact our
customer service team on 0333 777 8999. If you have had the
product for 28 days or less you may be offered a replacement,
refund or for a fully trained home service technician to visit your
home to assess the fault and repair the product where possible.
If you have had the product for more than 28 days we will send
an independant home service technician to review and repair the
product where possible and recommend further action.
You can write to us at
Home Customer Services
Next Retail Ltd,
Desford Road,
Leicester,
LE19 4AT
To View our full furniture range please visit
www.next.co.uk
Page 2 of 8
