PH2
1
Number of people required to assemble
Time to assemble
Two persons are required to assemble this item.
4.0 hours
Tools required
not supplied
not supplied
Missing parts
Home service technicians
You can write to us at
If you are missing any fixtures and fittings for your product
please contact our customer service team on 0333 777 8999
and they will be happy to arrange for a replacement to be sent
to you free of charge.
If you have a fault with your product please contact our
customer service team on 0333 777 8999. If you have had the
product for 28 days or less you may be offered a replacement,
refund or for a fully trained home service technician to visit your
home to assess the fault and repair the product where possible.
If you have had the product for more than 28 days we will send
an independant home service technician to review and repair
the product where possible and recommend further action.
Home Customer Services
Next Retail Ltd,
Desford Road,
Leicester,
LE19 4AT
To View our full furniture range please visit www.next.co.uk
Produced in Poland for Next Retail Ltd.
2 person assembly
Assembly instructions
This child’s bed conforms to BS8509:2008 + A1:2011
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNINGS
Do’s
Don’ts
Do not place this child’s bed near heat sources,
windows and other furniture
Do not use this child’s bed if any part is broken,
torn or missing
Assembly by adult only
Once assembled this bed is not designed to be
disassembled and reassembled
Children are likely to play, bounce, jump and climb on beds,
therefore the child’s bed should not be placed too close to
other furniture or windows, blind cords, curtain pulls or other
strings or cords and should be placed either tight to any wall
or have a gap of 300mm between the wall and the side of the
bed
This size of the mattress to be used with the child’s bed is
900mm x1900mm
This Child’s bed is intended for children above 4 years old
Not suitable for children under 4 years (junior
beds only)
When you are ready to start, make sure that you have the
right tools and plenty of space
Due to the size of the product we recommend that it is
assembled in the room intended for use
Unwrap all packaging materials and place the components on
a clean surface to protect it from damage,
We recommend that the packaging is used to protect the
surfaces during assembly
Carefully check that you have all the parts before beginning
assembly
Please periodically check all fittings and re-tighten as
necessary
To clean your item, wipe with soft cloth slightly dampened with
water. Then buff with a dry clean cloth
Routinely check that the fittings are secure and tighten any
fittings using the appropriate tools
If any parts are missing please contact Next to obtain
replacements. Under no circumstances should missing parts
or hardware be substituted unless obtained from Next
Do not drag or pull your furniture
Do not use silicone based furniture polish. Silicone in furniture
polishes can break down the lacquer finish
Do not stand or jump on this product
IMPORTANT - RETAIN FOR FUTURE REFERENCE -
READ CAREFULLY
COMPTON BLUE CABIN STATION
901697
901697-2015-V1
