4. Insert drawer bottom panel 11 into the grooves
of the drawer side panel 9 (both L&R).
5. Attach drawer back panel 10 to the assembled
unit with 4 x screws (E) and tighten.
6. Attach 1 x handle (H) to drawer front panel 8-R
with 2 x bolts (G) and tighten.
1. Insert the drawer into the unit.
2. Insert 2 x paper cards (J) to 2 x handles (H).
1.Use screw (C) and washer (B) to secure the
nylon strap (A) to the top panel.
2.Secure the other end of the strap to the wall with
an appropriate screw and wall plug for your wall
type. To hide the strap behind the unit, drill the
holes lower than the top of unit.
Warning :Always ensure the area to be drilled is
free from hidden electrical wires, water and gas
pipes.
NB: Wall fixings are not included-please source
suitable fixings for your wall type. If in doubt
please consult a qualified trades person.
STEP NINE
STEP TEN
SCREW
TOP
B
C
A
C
A
A
A
Page 5 of 6
