1. Attach 2 x hinges (D) to door panel 10 with 4 x
screws (E), tighten with a screwdriver.
2. Attach 1 x rubber pad (Q) to door panel 10.
1. Attach door panels 10 to the side panels 2-R
with 4 x screws (E) and tighten with a
screwdriver.
2. Insert 8 x shelf supporters (P) to the assembled
unit. Ensure all supports are at the same level for
each shelf.
3. Place adjustable shelf panel 20 (x2) onto the
shelf supports (P).
Note: The gaps between the doors and frame can
be changed by making adjustments to hinges with
a screwdriver. Refer to adjustment diagrams.
Laterally (Side to Side)
Front to back
Vertically ( up and down)
1. Insert 4 x cambolts (A) into the drawer front
panel 11.
2. Attach drawer front panel 11 to the side panel
14 (both L&R).
3. Insert 4 x camlocks (C) to the drawer side panel
14 (both L&R). Ensure the arrow indicator is
pointing towards the panel edge before tightening
with a screwdriver.
4. Insert the drawer bottom panel 15 into grooves
of drawer side panel 14 (both L&R).
5. Attach drawer back panel 13 to the assembled
unit with 4 x screws (J) and tighten.
6. Attach 2 x handle (M) to drawer front panel 11
with 4 x bolts (N) and tighten.
STEP ELEVEN
STEP TWELVE
STEP TEN
E
E
E
E
E
E
D
D
D
10
Q
C
C
C
C A
A
A
A
J
J
J
J
14-R
14-L
11
15
13
N
N
M
M
10
20(x2)
2-R
2-L
4
Page
5
of
7
