1. Attach central support rail 11 to headboard 1 and
footboard 2 with 4 x bolts (C), 4 x flat washers (H) and
4 x spring washers (L). Tighten with Allen key (P).
1. Attach drawer 2x support rails 4 to side rails 3 with
8 x bolts (B), 8 x flat washers (H) and 8 x spring
washers (L). Tighten with Allen key (P).
1. Insert slats 13 into end caps (O) and double end
caps (N) as shown.
2. Insert each end cap into corresponding holes in 2 x
side rails 3 and central support rail 11. Repeat
process for each slat.
NOTES:
* The curve of the slat must be facing upwards.
* Number of slats and caps vary dependant on size.
Quantities as shown in FITTINGS and PARTS
sections.
Note: Double 13 x Slats
King 14 x Slats
Super King 14 x Slats
2. Attach central support leg 12 to central support rail
11 using 2 x bolts (D), 2 x nuts (G) and 4 x flat
washers (M). Tighten with a crosshead screwdriver
and spanner (Q).
1. Attach drawer cross bar 5 to drawer support rails 4
with 2 x bolts (B), 2 x dowels (K), 2 x flat washers (H)
and 2 x spring washers (L). Tighten with Allen key (P).
STEP FOUR
STEP THREE
STEP TWO
Page 3 of 5
