SLEIGH COTBED
943445
Assembly instructions
Produced in Poland for Next Retail Ltd.
943445-2014-V1
Number of people required to assemble
Two persons are required to assemble this item
BEFORE YOU START
Time to assemble
1,5 hours
Tools required
Missing parts
If you are missing any fixtures and fittings for your product
please contact our customer service team on 0333 777 8999
and they will be happy to arrange for a replacement to be sent
to you free of charge
.
Home service technicians
If you have a fault with your product please contact our
customer service team on 0333 777 8999. If you have had the
product for 28 days or less you may be offered a replacement,
refund or for a fully trained home service technician to visit your
home to assess the fault and repair the product where possible.
If you have had the product for more than 28 days we will send
an independant home service technician to review and repair
the product where possible and recommend further action.
You can write to us at
Home Customer Services
Next Retail Ltd,
Desford Road,
Leicester,
LE19 4AT
To View our full furniture range please visit www.next.co.uk
not supplied
1
IMPORTANT - RETAIN FOR
FUTURE REFERENCE -
READ CAREFULLY.
This bed conforms to BS EN 716:2008 + A1:2013 and BS8509:2008 + A1:2011
WARNINGS
WARNING:
bed should not be placed too close to other furniture or windows, blind cords,
curtain pulls or other strings or cords and should be placed either tight to any
wall or have a gap of 300mm between the wall and the side of the bed
WARNING: Be aware of the risk of open fire and other heat sources of strong
heat, such as electric bar fires,gas fires, etc. in the near vicinity of the cot
WARNING: Do not use the cot if any part is broken, torn or missing and use
only spare parts approved by the manufacturer
WARNING: Do not leave anything in the cot or place the cot near to another
product, which could provide a foothold or present a danger of suffocation or
strangulation, e.g. strings, blind/curtain cords, etc.
WARNING: Do not use more than one mattress in the cot
The beds should not be placed too close to other furniture or windows, and
should be placed either tight against a wall or have a gap of 300mm between
the wall and the side of the bed.
WARNING: Assembly by adult only.
Once the mattress is placed on the bed base, make sure the gap between the
mattress and the sides and ends can not exceed 30mm
Do not leave anything in the bed, which could provide a foothold or present a
danger of suffocation or strangulation
Assembly fittings should always be tightened properly and care should be taken
that no screws are loose to ensure baby does not trap parts of the body, or
clothing
The mattress chosen shall be such that the internal height (surface of the
mattress to the upper edge of the bed frame ) is at least 500mm in the lowest
position of the bed base and at least 200mm in the highest position of the bed
base
To prevent injury from falls, the cot shall no longer be used for the child when
the child is able to climb out of the cot.
The height of the bed base is adjustable The lowest position is the safest and
that the base should always be used in that position as soon as the baby is old
enough to sit up
We recommend the size of the mattress: L 1400 mm x W 700 mm x H 100 mm
When you are ready to start, make sure that you have the right tools and plenty
of space
Due to the size of the product we recommend that it is assembled in the room
intended for use
Unwrap all packaging materials and place the components on a clean surface to
protect it from damage,
We recommend that the packaging is used to protect the surfaces during
assembly
Carefully check that you have all the parts before beginning assembly
Occasional overall cleaning should be carried out approximately once a month
by using a slightly dampened soft cloth then buff with a dry clean soft cloth
Never allow any kind of liquid to remain on your furniture. Absorption can cause
finishes to de-laminate.
When moving your assembled bed, It is best to lift the bed, and never to drag it
Please periodically check the stability and security of the beds. Please
periodically check the fasteners and re-tighten as necessary
Please do not jump on your furniture
Keep away from fire and other sources of strong heat, such as electric bar, fire,
gas fire etc
Do not drag or pull your furniture
Do not use silicone based furniture polish. Silicone in furniture polishes can
break down the lacquer finish
Do not stand or jump on this product