1. Use the template (A) provided to mark on the
wall the position of the fixings.
NB: Place the template over the back of the
cabinet to ensure that the holes match the
position of the hooks before drilling into your
wall
2. Use a spirit level to check that the fixings are level.
3. Drill four holes and insert an appropriate wall plug into
each. Insert the screws/washers and tighten . leaving the
screw head exposed by about 1/4 inch(6mm).
Warning:
Always ensure intended wall area to be drilled is
free from hidden electrical wires,water and gas
pipes.
NB:Wall fixings are not included- Please source
suitable fixing for your wall type. If in doubt
please consult a qualified trades person.
1. Lift the cabinet into position ensuring that the fixing
clips attached to the cabinet are firmly hooked over the
screw heads. Check the cabinet periodically to see that no
fitting has loosened and needs attention.
style 1 : left open
style 2 : right open
STEP NINE
STEP EIGHT
the mirror
Style 1
Style 2
Page 5 of 6
