BEFORE YOU START
Produced in China for Next Retail Ltd
1
Please periodically check all fittings and re-tighten as
necessary.
Do’s
We suggest you spend a short time reading through this
leaflet before you start.
When you are ready to start, make sure that you have the
right tools, plenty of space and a clean, dry area for assembly.
Tools not included.
Due to the size of this product we recommend that it is
assembled in the room intended for use.
Don’ts
Do not use power tools to construct this product.
Do not tighten screws until fully assembled.
Do not overtighten screws or bolts.
Do not use this product if parts are missing, damaged or worn.
Do not stand or jump on this product.
Number of people required to assemble
We recommend three people assemble this product.
Time to assemble
Tools required
Missing parts
If you are missing any fixtures and fittings for your product
please contact our customer service team on
0333 777 8999
and they will be happy to arrange for a replacement to be sent
to you free of charge.
Home service technicians
you
your product please
If
have a fault with
contact our
customer service team on
0333 777 8999.
If you have had the
product for 28 days or less you may be offered a replacement,
refund or for a fully trained home service technician to visit your
home to assess the fault and repair the product where possible.
If you have had the product for more than 28 days we will send
an independant home service technician to review and repair
the product where possible and recommend further action.
You can write to us at
Home Customer Services
Next Retail Ltd,
Desford Road,
Leicester,
LE19 4AT
To view our full furniture range please visit www.next.co.uk
4 hours
not supplied
not supplied
not supplied
PH2
7mm
Unwrap all packaging materials and place the components
on a clean surface to protect it from damage.
We recommend that the packaging is used to protect the
surface during assembly.
To clean your item, wipe with soft cloth slightly dampened
with water. Then buff with a dry clean cloth.
Do not use silicone based furniture polish. Silicone in
furniture polishes can break down the lacquer finish.
Never allow any kind of liquid to remain on your furniture.
Absorption can cause wood to warp or finishes to de-laminate.
Do not drag or pull your funiture.
This child’s bed conforms to BS EN 747-1:2012
Routinely check that the upper safety rail and ladder
attachment is secure and tighten any fittings using the
appropriate tools
All assembly fittings shall always be tightened properly.
Screws shall not be loose because a child can squeeze parts
of the body, or clothing (e.g. strings, necklaces, ribbons for
babies, dummies, etc.) could get caught. There would be
danger of strangulation.
WARNING:
Children can become trapped between the bed
and the wall. To avoid risk of serious injury the distance
between the top safety barrier and the wall shall not exceed
75mm or shall be more than 230mm.
WARNING:
Do not use this child’s bed if any part is broken,
torn or missing
WARNING:
High beds and the upper bed of bunk beds are
not suitable for children under six years due to risk of injury
from falls
Do not leave items such as ropes, strings, cords, harnesses
and belts attached to or hung to the bunk/high bed due to the
risk of strangulation
Children are likely to play, bounce, jump and climb on the
beds, therefore the child’s bed should not be placed too
close to other furniture or windows, and should be placed
either tight to any wall or have a gap of 300mm between
the wall and the side of the bed
WARNINGS
We recommend that the packaging is used to protect the
surfaces during assembly
This bed is designed to be used with a mattress with the
following dimensions H17 x W90 x D190cm.
Please ensure that the mattress depth does not go past the
permanent mark on the post/Upper Safety Barrier
681451
Assembly instructions
HEART AND STARS CABIN STATION (CHEST)
681451 - 2014 - V1
Carefully check that you have all the parts before beginning
assembly.
