General care and maintenance for Oil finished products
Dirty surfaces may be cleaned with a lint free cloth dampened with furniture oil. The surface may appear to become rough and dry
over time – this is normal and can easily be treated by lightly sanding the surface using fine sandpaper (i.e. no. 320 grit sand paper) in
the direction of the grain. This procedure must always be followed by re-oiling of the wood.
Full re-oiling the product
It is recommended to fully re-oil 1-2 times a year using outdoor furniture oil (e.g. linseed oil). Firstly carry out the sanding
process as described above and then dampen a lint free cloth with the furniture oil and rub into the wood in the direction of the grain
(always trial on an unseen face first to ensure the colour is acceptable). Several coats may be applied to the surface to increase the
quality of finish and give more protection to the timber.
Number of people required to assemble
Two person to assemble the unit and two person to lift the unit
into position.
Time to assemble
Look out for the symbol throughout this manual. Wherever you
see it we will have a handy tip to help you with assembly of your
product.
Tips
Tools required
1 hour
Allen key
4 mm
Supplied
Not supplied
Phillips
screw driver
Missing parts
If you are missing any fixtures and fittings for your product please
contact our customer service team on
0 333 777 8999
and they
will be happy to arrange for a replacement to be sent to you free of
charge.
Home service technicians
If you have a fault with your product please contact our customer
service team on
0 333 777 8999.
If you have had the product for
28 days or less you may be offered a replacement, refund or for a
fully trained home service technician to visit your home to assess
the fault and repair the product where possible. If you have had
the product for more than 28 days we will send an independant
home service technician to review and repair the product where
possible and recommend further action.
You can write to us at
Next Retail Ltd,
Desford Road,
Leicester,
LE19 4AT
To view our full furniture range please visit
www.next.co.uk
BEFORE YOU START
Produced in Vietnam for Next Retail Ltd.
364671
- 2015 - V1
SEVILLE LOUNGER
364671
Assembly instructions
WARNINGS
For domestic and outdoor use only.
We suggest you retain these instructions for future reference
Keep fittings out of children’s reach and keep children well away
from construction area.
Please periodically check all fittings and re-tighten as necessary
Unwrap all packaging materials and place the components on top
of the carton box or on a clean floor to protect it from damage
This product should only be used on firm, level ground. Make sure
the legs remain in contact with the ground
Furniture with cushion should not be exposed to direct sunlight
for long time
Please do not allow children to jump up and down on the lounger
Avoid allowing pets on the cushion as their claws may cause
damage to the fabric
When your new lounger arrives, you may notice that some of the
cushions may have been creased or squashed during transit.
This can be simply corrected by gently patting the cushions back
into shape to re-distribute the filling and reshape the covering.
Do’s
We suggest you spend a short time reading through this leaflet
before you start
When you are ready to start, make sure that you have the right
tools and plenty of space
Unwrap all packaging materials and place the components on
a clean surface to protect it from damage, We recommend that
the packaging is used to protect the surfaces during assembly
Carefully check that you have all the parts before beginning
assembly
Please retain the assembly tools. You will need them in the future
to re-tighten the bolts, or if you want to dismantle the furniture for
storage.
Please make sure that the product is clean and dry before putting
it into storage.
We recommended the use of furniture covers to protect your
furniture when not in use. During severe weather conditions,
please move your furniture inside
Don’ts
Do not stand on your lounger.
When moving furniture never drag the pieces across the floor, as
this will cause damage to the joints
Please do not leave your product outside during bad weather and
winter months the product should be dismantled and stored in a
cool dry place.
