20
PARTS:
• • NIL
19
PARTS:
• • 2 x M8 16mm Bolts
• • 2 x M8 Washers
21
Adjust the pedal assembly to your desired angle and align the T-Nuts previously installed in STEP 15a
with the holes on the Pedal Adjustment Fins. Bolt through and secure with M8 Bolts and Washers.
PARTS:
• • 4 x M8 16mm Bolts
• • 4 x M8 Washers
20
Align the holes on the Pedal Adjustment Fins with the T-Nuts previously installed in STEP 01a/01b. Bolt
through and secure using 2 x M8 Bolts and Washers. Repeat on the other side.
Repeat
on Other
Side
Loosen the Bolts on the Pedal Plates. Adjust to your desired position using the alignment lines and
tighten the Bolts to lock the Pedal Plates in position.
21
PARTS:
• • 2 x Seat Slider Ratchet Handles
24
A) Align the Rear Seat Slider Assembly with the T-Nuts previously installed in STEP 01a & STEP 01b.
B) Bolt through and secure with 2 x M8 Ratchet Handles.
PARTS:
• • 2 x Seat Slider Ratchet Handles
23
A) Align the front Seat Slider Assembly with the T-Nuts previously installed in STEP 01a & STEP 01b.
B) Bolt through and secure with 2 x M8 Ratchet Handles.
PARTS:
• • 6 x T-Nuts • • 4 x Seat Sliders
End Plates
• • 4 x M8 16mm Countersunk Bolts
• • 4 x Sticky Felt Pads
(35mm x 40mm)
22
A) Install 2 x T-Nuts into the bottom channel of the Front Seat Slider Member for the Buttkicker Mount Pole. Install 2 x T-Nuts
into the top channel of both Seat Slider Members and attach Felt Pads to the bottom of the Seat Slider Members.
B) Align the holes on the Seat Slider End Plates with the threaded holes on the Seat Slider Members. Bolt through and secure
with 4 x M8 Countersunk Bolts.
Repeat
on Other
Side
Repeat
on Other
Side
Video Instruction: bit.ly/nlrbuild
PEDAL ADJUSTMENT RANGE
PEDAL ANGLE ADJUSTMENT
Repeat
on Other
Side
A
)
B
)
A
)
B
)
A
)
B
)
(
Butt-Kicker T-Nut Locations
)
