- Read t his docum ent before using.
- Keep t his docum ent .
- Observe all warnings and caut ions.
PAGE 2 OF 2
Dimensions:
Use:
IMPORTANT
Ensure that the surface
–
wall or ceiling
–
is strong enough to hold 4 times PS cabinet weight and
that the screws 12mm diameter and corresponding plugs
required to fix the “U” bracket on the
wall or under the ceiling are properly dimensioned.
•
12mm
diameter screws (not provided) are required to secure the “U” Bracket on the wall or ceiling.
•
Remove the 2 screws on upper and 1 on lower side of PS8.
•
Position
the PS8 inside the “U” Bracket to desired angle; “U” Bracket oblong holes must be properly aligned with
panels holes; Use 2 holes or 1 and the oblong hole to adjust the angle.
•
Use the screws and washer provided to connect “U” bracket to cabinet.
WARNING: Screws must be secured using Loctite 243
TM
•
NEXO cannot accept responsibility for accidents caused by any factor other than defects in this product itself.
•
Please check the web site nexo-sa.com for the latest update.
