background image

 PLEASE

 

READ

 

CAREFULLY

 

BEFORE

 

PROCEEDING

 

  

Page 

3/58

 

 

With RAY SUB patented technology, NEXO is again moving one step forward. RAY SUB 
technology is about optimizing positioning and phase relationship of radiating surfaces in 

vented enclosures, so that acoustic distance from rear to front sections always increases 
as frequency decreases; consequently, rear and front section always sum up efficiently – 
typically 5 dB gain from rear section in the forward direction – and cancel in the 
rearward direction. 
 
Used as a single cabinet, RAY SUB Technology allows the same cabinet to be configured 
for any polar pattern, omnidirectional as a standard direct radiating subwoofer when 
speakers are facing the audience, or highly directional when cabinet is rotated speakers 

sideways or upwards. 
Used in arrays, RAY SUB subwoofers can be set back to back, front to front, in vertical 
columns, and beam-steered upwards or downwards provided column length is sufficient. 
 
NEXO RAY SUB technology brings a never achieved low frequency directional control to 
the sound reinforcement industry, raising one more time NEXO standards. 

 

Содержание Ray Sub Series



























































Отзывы: