DESCRIPTION
Page
6
/
14
IDS110 - IDS210 - Accessories
DESCRIPTION
→
The IDS110 and the IDS210 are two compact and powerful subwoofers, ideally complementing the ID24 speakers. Their low-
profile design is elegant, and allows placement in various
places (in walls, staircases, under furniture or benches…).
→
ID
S110: 1x 10” loudspeaker
→
IDS210: 2x 10” loudspeakers
→
Versions:
•
IDS110t: for
“Touring” applications; Handles – M20 threaded base; Black, white.
•
IDS110i: for fixed installation; Black, white.
•
IDS210t:
for “Touring” applications; andles – M20 threaded base; Black, white.
•
IDS210i: for fixed installation; Black, white.
→
Connectors:
•
IDS110t / IDS210t: equipped with two Speakon NL4 connectors with parallel-wired pins, one on each side and two
on the back. The 1+/1- pins are used by the sub.
•
IDS110i / IDS210i: The subwoofer is supplied with a fixed cable (HO7ZZ-F), 2 x 2.5mm2 section, length 2m, outside
diameter 9mm ±1mm.
(+) : Red / Brown ; (-) : Black / Blue
→
Amplification
•
The IDS110 and IDS210 subwoofers MUST be used with a NEXO processor to handle EQ, phase alignment,
crossover and excursion/thermal protection for the system loudspeakers. There are two NEXO processor series
supporting the IDS110 and IDS210 subwoofers: NXAMP (4-channel) amplified processors and DTD processors DTD
( sub). DTD processors ensure optimal performances when used with DTDAMP power amplifiers (IDS110
only).
•
The following table shows the number of IDS110 / IDS210 subwoofers usable with each solution.
NXAMP4x1
MK2
NXAMP4x2
MK2
NXAMP4x4
MK2
DTD + DTDAMP 4x0.7
DTD + DTDAMP 4x1.3
IDS110
1 or 2 per channel
1 or 2 per channel
1 or 2 per channel
1 per channel
1 per channel
IDS210
1 per channel
1 per channel
1 per channel
Recommended
