Nexo ID14, Руководство пользователя

Страница: 4 / 16

EQUIPMENT
Page 4 / 16 ID14
EQUIPMENT
3 locations for hanging, 1 on the back (2x M6 / 73mm pitch) and on each side (1x M10).
Assembly on distance rod or speaker stand
Place distance rod on the connector plate (M10) of the Sub.
Place ID14 on the distance rod / monitor stand
IMPORTANT
Speaker stand must be rated for ID14 weight.
Speaker stand must always be installed on a horizontal surface.
Stand height and footprint must be defined to prevent assembly
from collapsing.
Ensure that audience is not allowed within a safety area which
radius is equal or higher than assembly height.
Test steadiness of the assembly by pushing in all directions.