© 2020 Nexmosphere. All rights reserved. v1.0 / 04-20
All content contained herein is subject to change without prior notice.
N ex m o s p h e re
H i g h Te c h C a m p u s 1 0 ( M μ b u i l d i n g )
5 6 5 6 A E E i n d h ove n • T h e N e t h e r l a n d s
T
+ 3 1 4 0 2 4 0 7 0 7 0
E
s u p p o r t @ n ex m o s p h e re.c o m
3
QUICK START GUIDE | XN-185 XPERIENCE CONTROLLER
Example 4 | Button LED control
To set all button LEDs of a (touch) button interface
connected to X-talk interface 002 to “on”, send the
following API commands from the 3rd party device to the
XN-185 controller:
Example 5 | X-Wave LED control
To initiate an X-Wave LED pattern on an X-Wave connected
to X-talk interface 003, send one of the following API
example commands from the 3rd party device to the XN-
185 controller:
Combining Elements
The XN-185 Xperience controller has 8 X-talk interfaces to which any combination of Elements can be connected. For
example, all examples in this Quick Start Guide can be combined on a single XN-185. The API commands and operation
will remain the same. When connecting multiple Elements that require a high amount of current (LEDs or push buttons
with LED ring), calculate the total required current of the Elements and check if this is within the specification of the
controller and its power supply source.
To set all button LEDs of a (touch) button interface
connected to X-talk interface 002 to “off”, send the
following API commands from the 3rd party device to the
XN-185 controller:
40% brightness, color 0 (white), 0.5 second ramp time
Blue pulsing pattern (99% to 20%), 1.8 second ramp time
White wave pattern moving to the left
X002A[255]
X003B[240005]
X003B[399C1801020C180018]
X003B[499018001200009]
X002A[0]
XN
XN-185
(Xperience controller)
USB-A to Micro-USB cable
(connect to 3rd party device)
XT-B4N
(4x button interface)
XT-4F
(Touch buttons)
Push buttons
(with LED, 4x)
XT-B4
1
2
3
4
XN
XN-185
(Xperience controller)
USB-A to Micro-USB cable
(connect to 3rd party device)
XW-L96
(X-Wave LED)
XW-L9
XT-B4N
(4x button interface)
Push buttons
(with LED, 4x)
XT-B4
1
2
3
4
XN
XN-185
(Xperience controller)
USB-A to Micro-USB cable
(connect to 3rd party device)
XW-L96
(X-Wave LED)
XW-L9
XY-146
(presence sensor)
XR
XR-C10
(RFID antenna)
XR-C10
XR-DR1
(RFID antenna driver
RFID Tags
(number 1-3)