Nexiom Company Limited
Copyright © 2010-2011 Nexiom Company Limited All Ringhts Reserved
Operation modes -
Select by Mode Switch. Each modes setting can be config in Nexiom Travel Router web setup page
4.1 Repeater Mode
In the Repeater mode, you can use the Nexiom Travel Router to connect with the
authorized WAN SSID to extend your wireless coverage
4.2 AP Mode
When in Access Point (AP) mode, the Nexiom Travel Router connects LAN outlet.
To let computers and /or devices to access internet via WiFi.
4.3 Gateway Mode (Default Setup Mode)
In the Gateway mode, the Nexiom Travel Router connects to the Internet via an
ADSL, a cable modem or LAN outlet.
To let computers and /or devices to access internet via WiFi with Routing control and Firewall.
4.4 Wireless Gateway Mode
Create own WiFi enviornment via authorized WAN SSID, isolated & protect between inner and
outer internet, to keep all the inner wireless internets in a safe isolated area by self-definition.
Long press the RESET button 10 seconds when power on, release it after seeing all LED indicator blinking together. The Nexiom Travel Router be Reset to factory default.
Unplug (power off) Nexiom Travel Router. Plug in power again to restart the device.
4
4
5
Reset
