USB WIRED CONNECTION (FOR
SWITCH/PC)
1. Use the provided cable to connect the controller to
your device.
2. There are three different modes for wired
connections. These can be switched between by
pressing and holding the
+
and
-
buttons at the same
time for three seconds.
a.
DirectInput mode
is the default mode for
connecting to a PC. When using this mode the 2nd
and 4th player indicator LEDs will remain
permanently lit indicating this is the active mode.
b.
XInput mode
is an alternate mode for connecting
to a PC. This mode can be used if you find controller
Note: A PC will provide charging to the controller while
connected, the Switch console will not.
3s
3s
+
a
b
c
12
