NEXIBO BK348, Руководство пользователя

Страница: 9 / 13

Instructions for Use
Connect to your device
The Nexibo keyboard can only be connected to devices that have bluetooth. No additional driver
or software needs to be installed to use the keyboard.
Step 1: Switch on the keyboard using the ‘ON’ button on the back of the keyboard. A blue light
will light up for 4 seconds. The blue light will then go out to save energy. The keyboard is still on.
Step 2: Press the next button ‘Connect’ so that the keyboard can be detected by the device to
which it is to be connected.
Step 3: go to the bluetooth settings of the device you want to connect the keyboard to.
Step 4: The pairing name of the keyboard is ‘Nexibo Keyboard’. Connect your device with this
name.
Please note:
• The keyboard can only be connected to one device at a time.
• After the first pairing, the last connected device will automatically connect to the keyboard
when turning it on.
• If the connection fails, remove the keyboard from your device and try the above connection
procedure again.
• To save energy, the keyboard will go into sleep mode after some time of inactivity. Activate
the keyboard again by pressing any key.
Buttons
On/Off button: Switch the keyboard on or off. Once this button is pressed, a light will illuminate
for four seconds. After this, the light will go out to save energy. However, the keyboard is still on.
Bluetooth connection button: switches the bluetooth connection on so that the keyboard can
be detected by your PC, laptop, tablet or phone..
LED lights
Caps: when lit, the Caps Lock function is on.
Bluetooth: this light will blink when the Bluetooth button is pressed. The light will continue to
flash until the keyboard is connected to the device.
08