6
www.nexian.com
Getting Started
continued
Installing the NexiCam software:
You must install the NexiCam software on the
iPAQ Pocket PC
before
using the camera. If you
do not, the iPAQ will not recognize the NexiCam
and will not take pictures.
Installing the NexiCam software on your iPAQ,
however, is a simple process. Here’s what to do:
(1) Insert the NexiCam installation CD in the
CD-ROM or DVD-ROM drive of your computer
(2) If you’ve selected “AutoPlay” for CD-ROMs,
the disc will open up and you can select
“Setup” from the file/program menu
(3) Otherwise, use the Windows file explorer to
open the file menu on the CD and select
“Setup” to launch installation
(4) The program will ask you where to save the
installation files. Select a location by clicking
“Browse…,” or leave the default location
and click “Next”
(5) The computer will then schedule the NexiCam
software for installation on your handheld
during your next synchronization.
(6)
Place your iPAQ Pocket PC in the docking
station or connect the synchronization cable
to the iPAQ Pocket PC. If ActiveSync doesn’ t
automatically start, click on the desktop
ActiveSync icon or the ActiveSync icon on
your iPAQ Pocket PC.
(7)
The NexiCam software will be installed during
this synchronization –
do not disconnect
the
iPAQ Pocket PC during this time.
Wait
until
the synchronization is finished.
(8) The program will ask if the “Nexian
NexiCam” should be installed in the default
installation directory… Click “Yes”
(9)
It will ask you to check your mobile device
screen to see if there are additional steps
necessary to complete the installation
(10) On your iPAQ Pocket PC, click “Yes” to
restart
(11) When the ActiveSync is finished, your
NexiCam software is installed on the iPAQ
Pocket PC. End the session, disconnect the
iPAQ and you’re ready to go!
