Nexgrill XH-300A-3310, Руководство по сборке и эксплуатации

Страница: 25 / 32

25
LIGHTING THE GRILL
1. Main Burners -Open the hood of your grill. Never light your grill with the hood closed. Turn the gas cylinder valve
to the “ON” position. Push and turn control knob counterclockwise slowly to the “HIGH/ ” position until a
clicking sound is heard, the burner will light automatically. If the burner does not light, please repeat 2 or 3 times.
Once the burners are lit, repeat the same action to light other burners until all desired burners are lit. IF ANY
BURNER FAILS TO LIGHT, TURN OFF THE GAS AT THE BURNERS AND THE CYLINDER, WAIT 5
MINUTES AND TRY AGAIN. If the burners can not be lit using the ignition system, turn to the manual lighting
instructions under important information.
2. Once the burners are lit, turn all the main burners to the HIGH setting for 3-5 minutes to pre-heat the grill. This
should be done before each session. When pre-heating is complete, cooking can begin.
4. To prevent food sticking, we recommend that you use a long handled brush to apply a light coat of cooking oil to
the cooking grids before each grilling session.
5. Side Burner -Open the lid of the side burner. Never light the side burner with the lid closed. Turn the gas cylinder
valve to the “ON” position, Push and turn control knob counterclockwise slowly to the “HIGH/ ” position until
a clicking sound is heard, the burner will light automatically. If the burner does not light, please repeat 2 or 3 times..
IF THE BURNER FAILS TO LIGHT, TURN OFF THE GAS AT THE BURNER, WAIT 5 MINUTES AND TRY
AGAIN. If the burner cannot be lit using the ignition system, turn to the manual lighting instructions.
OFF High Low