18
12.Igniter Wire Installation
Insert the side burner ignition wire to the ignite module
as shown in Fig.19
Note:
You only
need to insert the side burner ignition
wire, the other five wires have been pre-assembled
.
Reminder:
While
completing
igniter wire
installation, make sure there is a
3 mm
gap between the igniter pin and the side
burner, so
that it ignites easily.
SB igniter wire
13. Battery Assembly
Unscrew the electronic igniter button and
place the battery (C1) into the housing
with positive terminal (+) facing outward.
Replace the ignition button after the
battery has been installed as shown in
Fig.20
14. Grease Tray, Greasy Box Assembly
Fig.19
Assembly Instructions
Z
A1
Fig.21
Fig.20
D1
BB
14b) Place the
side
grease box (Z),
main
grease
tray (B1) with Tank
heat shield (D1) and Grease box
(A1) from the rear of grill as shown
in Fig.21
14a) Use two
5/32-in.X10 mm
Truss
Head Screws (BB) and two 5/32-in flat
washers (HH) to fix the
main
grease
tray (B1) and tank heat shield(D1) as
shown in Fig.21
B1
C1
2X 2X
HH
Содержание 720-0778B
Страница 91: ...90 M4 Spanish Michael_Wu 2011 11 14...