Nexgrill 720-0670C, Инструкции по сборке и эксплуатации

Страница: 10 / 18

Installing Side Burner & Side Shelf
1. Remove (2) preinstalled 1/4 x 15mm Phillips head
screws from left side of grill head as shown. Do not
screw in fully; leave ¼ extended for shelf assembly.
(Fig. 10)
2. Through side burner shelf screw holes, hang side
burner on two screws. (Fig. 11)
3. Using (2) 1/4 x 15mm screws and (2) 1/4-in flat
washer, securely attach side burner shelf to grill head.
(Fig. 12)
4. Attach right side burner control panel to the main
control panel use (1) 5/32-in. x 10mm truss head screw
and (1) 1/4-in flat washer. (Fig. 12)
5. Repeat steps 2 through 4 to install left side shelf.
Figure 11
9
Figure 10
10 0
2 0 0
3 00 4 0 0 5 0 0
6 0 0
70 0
8 0 0
1 0 0
2 0 0
3 0 0 40 0 50 0
6 00
7 0 0 80 0
Figure 12
4pcs: 1/4 X 15mm
2pcs: 5/32 X 10mm
Installing Side Burner Valve
1. Remove two screws from side burner control valve
face. Insert side burner valve control stem through
hole in side burner control panel. See Figure 13.
2. Place side burner control knob bezel over side
burner valve control stem. Secure bezel to control
panel and valve with 2 screws removed in step 1.
Push control knob onto valve control stem. See Figure
14.
3. Insert valve orifice tip into burner tube as shown in
Fig. 14. Reattach burner to underside of side burner
shelf with screws removed in step 1.
4. Using (2) 5/32-in. x 10mm truss head screw
Plug ignition wire into igniter wire electrode on
underside of burner (Fig.15).
Figure 13
Figure 15
Figure 14