Zigbee DALI TW Converter with power supply
6
Fitting and electrical connection
DANGER!
Electrical shock when live parts are touched.
Electrical shocks can be fatal.
Before carrying out work on the device or load, disengage all the corresponding cir-
cuit breakers, secure against being switched on again and check that there is no
voltage!
To ensure good transmission quality, keep a sufficient distance from any possible sources of in-
terference, e.g. metallic surfaces, microwave ovens, hi-fi and TV systems, ballasts or trans-
formers.
Figure 2: Connection diagram
(8)
DALI TW luminaire DT6
(9)
DALI TW luminaire DT8
(10)
Push-button (normally open contact)
Figure 3: Clampable conductor cross-section
DALI cable: type, cross-section and routing according to the specifications for 250 V cables.
DALI and mains voltage wires can be run together in a cable, e.g. NYM 5x1.5 mm².
The connected DALI luminaires may be operated on different phases.
3 / 7
82403700
02.09.2020
