Zigbee DALI TW Converter with power supply
Zigbee DALI TW Converter with power supply
Art. no.: 57007000
Operating instructions
1
Safety instructions
To avoid possible damage, read and follow the following instructions:
Installation only by persons with sound knowledge and experience in the following areas:
–
5 safety regulations and standards for the installation of electrical systems
–
Selection of suitable tools, measuring devices, installation materials and, if necessary,
personal protective equipment
–
Installation of the installation material
–
Connection of devices to the building installation under consideration of local connection
conditions
Improper installation endangers your own life and the lives of users of the electrical system and
there is a risk of serious damage to property, e.g. through fire. You are at risk of personal liabil-
ity for personal injury and damage to property.
Contact an electrical contractor!
Danger of electric shock. Always disconnect before carrying out work on the device or load. In
so doing, take all the circuit breakers into account, which support dangerous voltages to the
device and or load.
Read the instructions in full, observe them and keep them for future reference.
2
Device components
Figure 1
(1)
DALI TW control unit (actuator)
(2)
Connection terminals input side
(3)
Connection terminals output side
(4)
Strain relief
(5)
Connection terminals cover caps
(6)
Button Prog.
(7)
LED
3
Intended use
–
Zigbee actuator for adjusting the brightness of luminaires with DALI interface
–
Setting the colour temperature of luminaires with DALI DT8 or DT6 for Tunable White in
accordance with IEC 62386
1 / 7
82403700
02.09.2020
