4
FORM NO. L-21699-B-1120
GENERAL SPECIFICATIONS
Specifications:
Holding Force
Up to 22350 N (5026 lbs)
Actuation Pressure
1 - 5.5 bar (14.5 - 120 psi)
External Temp. Limits
4.5 - 65.5 C (40 - 150 F)
Approximate Weight
Up to 29.5 kg (65 lbs)
GENERAL SAFETY PRECAUTIONS
CAUTION
Use lifting aids and proper lifting
techniques when installing, removing,
or placing this product in service.
CAUTION
Do not exceed the maximum holding force
of the unit. The locking function will be
overloaded, causing rod slip and possible
damage to the shaft and product.
CAUTION
Watch for sharp features when
interacting with this product. The
parts have complex shapes and
machined edges.
CAUTION
Do not use a Rod Lock to stop a rotating
shaft. This product is not intended for
torsional braking or frequent dynamic
braking.
WARNING
Ensure proper guarding of the product is
used. Nexen recommends the machine builder
design guarding in compliance with OSHA 29
CFR 1910 “Occupational Safety and Health
Hazards”.
Do not engage the Rod Lock without
a properly sized rod in place or
damage to the internal components
may result.
CAUTION
CAUTION
Do not attempt to disassemble this
product. Product components are
spring-loaded and can cause serious
injury.
Figure 1 Caution
WARNING
Keep indoors. This product is
intended for indoor environments
only. Use of the brake outdoors will
damage components. No Excessive
Dust or humidity permitted.
