8
FORM NO. L-21026-D-0105
13. Remove the Retaining Ring (item 28) from the
Piston (item 13).
14. Fully support the Piston (item 13) and press the Ball
Bearing (item 32) out of the Piston (item 13).
15. Clean the bearing bore of the Piston (item 13) with
fresh safety solvent, removing all old Loctite residue.
16. Apply an adequate amount of Loctite® 680 to
evenly coat the outer race of the new Ball Bearing
(item 32).
17. Carefully align the outer race of the new Ball Bearing
(item 32) with the bore of the Piston (item 13).
18. Support the Piston (item 13). Press the new Ball
Bearing (item 32) into the Piston by pressing on the
outer race of the Bearing.
19. Install the Retaining Ring (item 28) in the Piston
(item 13).
20. Fully support the inner race of the Ball Bearing (item
32) and press the new Friction Disc (item 7) into the
Bearing bore.
21. Remove the Retaining Ring (item 2) from the Hub
(item 1) at the end where it meets the Air Chamber.
22. Fully Support the Air Chamber (item 9) and press the
Hub (item 1) out of the Air Chamber.
23. Remove the Retaining Ring (item 30) from the Air
Chamber (item 9).
24. Fully support the Air Chamber (item 9) and press the
Ball Bearing (item 8) out of the Air Chamber.
25. Clean bearing bore of the Air Chamber (item 9) with
fresh safety solvent, removing all old Loctite residue.
26. Apply an adequate amount of Loctite® 680 to
evenly coat the outer race of the new Ball Bearing
(item 8).
27. Carefully align the outer race of the new Ball
Bearing (item 8) with the bore of the Air Chamber
(item 9).
28. Support the Air Chamber (item 9). Press the new
Ball Bearing (item 8) into the Air Chamber by
pressing on the outer race of the Bearing.
CLUTCH ASSEMBLY
(continued...)
(continued...)
FIGURE 7
FIGURE 8
Friction Disc
Assembly
(Item 7)
Retaining
Ring
(Item 28)
Bearing
(Item 32)
Piston
(Item 13)
Seal
(Item 10)
Seal
(Item 11)
Air Chamber
(Item 9)
Hub
(Item 1)
O-Ring
Seal
(Item 11)
Air Chamber
(Item 9)
Bearing
(Item 8)
Retaining Ring (Int)
(Item 30)
Retaining Ring (Ext)
(Item 2)
®
DIST. AUTORIZADO
MEX (55) 53 63 23 31
QRO (442) 1 95 72 60
MTY (81) 83 54 10 18
[email protected]
