Nexcom XPPC 16-101 Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 58

Nexcom XPPC 16-101 Скачать руководство пользователя страница 51

Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.

37

XPPC 16-101 User Manual

Chapter 3: BIOS Setup

Trusted Computing

This section is used to configure Trusted Platform Module (TPM) settings.

Advanced

Version 2.18.1263. Copyright (C) 2021 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Enables or Disables BIOS
support for security device.
O.S. will not show Security
Device. TCG EFI protocol and
INT1A interface will not be
available.

Configuration

Security Device Support

NO Security Device Found

[Disable]

Security Device Support

Enables or disables BIOS support for security device. O.S will not show
Security Device. TCG EFI protocol and INT1A interface will not be available.

Advanced

Version 2.18.1263. Copyright (C) 2021 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

This is a workaround for OSes
without XHCI hand-off support.
The XHCI ownership change

should be claimed by the XHCI
driver.

USB Configuration

USB Module Version

USB Controllers:

1 XHCI

USB Devices:

1 Keyboard

XHCI Hand-off

USB Mass Storage Driver Support

USB hardware delays and time-outs:

USB transfer time-out

Device reset time-out

Device power-up delay

17

[Enabled]

[Enabled]

[20 sec]

[20 sec]

[Auto]

XHCI Hand-off

This is a workaround for OSs that does not support XHCI hand-off. The
XHCI ownership change should be claimed by the XHCI driver.

USB Mass Storage Driver Support

Enables or disables USB mass storage driver support.

USB transfer time-out

The time-out value for control, bulk, and Interrupt transfers.

USB Configuration

This section is used to configure the USB.

«
...
49
50
51
52
53
...
»

Содержание XPPC 16-101



























































Отзывы:

Нет отзывов