Nexcom XPPC 10-200 Скачать руководство пользователя страница 50

Страница: 50 / 58

XPPC 10-200 User Manual

Chapter 4: BIOS Setup

Trusted Computing

This section is used to configure Trusted Platform Module (TPM) settings.

Advanced

Aptio Setup - AMI

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Enables or Disables BIOS
support for security device.
O.S. will not show Security
Device. TCG EFI protocol and
INT1A interface will not be
available.

TPM 2.0 Device Found

Firmware Version:

Vendor:

Security Device Support

Active PCR banks

Available PCR banks

SHA-1 PCR Bank

SHA256 PCR Bank

Pending operation

Platform Hierarchy

Storage Hierarchy

Endorsement Hierarchy

Disable Block Sid

7.62

IFX

[Enabled]

SHA256

SHA-1, SHA256

[Disabled]

[Enabled]

[Disabled]

Security Device Support

Enables or disables BIOS support for security device. O.S will not show
Security Device. TCG EFI protocol and INT1A interface will not be available.

SHA-1 PCR Bank

Enables or disables SHA-1 PCR Bank.

SHA256 PCR Bank

Enables or disables SHA256 PCR Bank

Security Device Support

Disabled

Enabled

Pending operation

Schedules an operation for the security device.

Platform Hierarchy

Enables or disables Platform Hierarchy.

Storage Hierarchy

Enables or disables Storage Hierarchy.

Endorsement Hierarchy

Enables or disables Endorsement Hierarchy.

Disable Block Sid

Override to allow SID authentication in TCG storage device.

Содержание XPPC 10-200

























































Результаты поиска

Содержание XPPC 10-200

Отзывы:

Бренды по названию

Популярные бренды

Nexcom XPPC 10-200, Руководство пользователя

Результаты поиска

Содержание XPPC 10-200

Отзывы:

Бренды по названию

Популярные бренды