manualshive.com logo in svg

Nexcom PEAK 887VL2, Руководство пользователя

Поделиться
Скачать
Nexcom PEAK 887VL2 Скачать руководство пользователя страница 44

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.

30

PEAK 887VL2 User Manual 

Chapter 3: BIOS Setup

Advanced

Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Enable/Disable Intel (R) Active 

Mangement Technology BIOS 
Extension.
Note: iAMT H/W is always 

enabled.
This option just controls the 
BIOS extension execution. If 
enabled, this requires addtional 

firmware in the SPI device.

Intel 

AMT 

  [Enabled]

Un-Configure ME 

 

[Disabled]

Disable 

ME 

  [Disabled]

AMT Configuration

This section is used to configure Active Management Technology (AMT)
options.

Intel

®

 AMT

Enables or disables Intel

®

 Active Management Technology.

Un-Configure ME

Enables or disables Un-configure ME without password.

Disable ME

Set ME to Soft Temporary Disabled.

Hot Plug

Enables or disables hot plugging feature on SATA port 0 to port 3.

External SATA

Enables or disables the external SATA option on SATA port 0 to port 3.

SATA Device Type

The options are Hard Disk Drive and Solid State Drive.

Spin Up Device

Enables or disables staggered spin up on devices connected to SATA port 0 
to port 3.

Содержание PEAK 887VL2






























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды