manualshive.com logo in svg

Nexcom nTUF 600, Руководство пользователя, Страница: 83 / 100

Поделиться
Скачать
Nexcom nTUF 600 Скачать руководство пользователя страница 83

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.

69

nTUF 600 User Manual 

Chapter 4: BIOS Setup

Exit

Advanced

Chipset

PCIPnP

Security

Main

v02.61 (C) Copyright 1985-2006, American Megatrends, Inc.

BIOS SETUP UTILITY

←  

Select Screen

↑↓  

Select Item

+/-  

Change Field

Tab 

Select Field

F1 

General Help

F10  

Save & Exit

ESC  

Exit

Enables support for legacy USB. 
AUTO option disables legacy if 

no USB devices are connected.

USB Configuration

Module Version - 2.24.3-13.4

USB Devices Enabled :

   1 Mouse

Legacy USB Support

Port 64/60 Emulation

USB 2.0 Controller Mode

BIOS EHCI Hand-Off

Hotplug USB FDD Support

► USB Mass Storage Device Configuration

USB Configuration

This section is used to configure USB devices.

[Enabled]

[Disabled]

[HiSpeed]

[Enabled]

[Auto]

Legacy USB Support

Due to the limited space of the BIOS ROM, the support for legacy USB 
keyboard (in DOS mode) is by default set to Disabled. With more BIOS ROM 
space available, it will be able to support more advanced features as well as 
provide compatibility to a wide variety of peripheral devices.

If a PS/2 keyboard is not available and you need to use a USB keyboard to 
install Windows (installation is performed in DOS mode) or run any program 
under DOS, set this field to Enabled.

Port 64/60 Emulation

Enables I/O port 60h/64h emulation support. This should be enabled for the 
complete USB keyboard legacy support for non-USB aware OSes.

USB 2.0 Controller Mode

Sets the USB 2.0 controller mode to HiSpeed (480 Mbps) or FullSpeed
(12 Mbps).

BIOS EHCI Hand-Off

Enable this field when using operating systems without the EHCI handoff
support.

Hotplug USB FDD Support

Enables support for USB FDD hot plug.

USB Mass Storage Device Configuration

Configuration for USB mass storage class devices.

Содержание nTUF 600





































































































Отзывы:

Нет отзывов