manualshive.com logo in svg

Nexcom NSA 5150, Руководство пользователя

Поделиться
Скачать
Nexcom NSA 5150 Скачать руководство пользователя страница 66

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.

52

NSA 5150 User Manual 

Chapter 4: BIOS Setup

ACPI Settings

This section is used to configure ACPI settings.

Trusted Computing

This section is used to configure Trusted Platform Module (TPM) settings.

Advanced

Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Enables or Disables BIOS ACPI 

Auto Configuration.

ACPI Settings

Enable ACPI Auto Conf

Lock Legacy Resources

[Disabled]

[Disabled]

Advanced

Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Enables or Disables BIOS 
support for security device. O.S. 

will not show Security Device. 
TCG EFI protocol and INT1A 
interface will not be available.

Configuration

  Security Device Support

Current Status Information

  SUPPORT TURNED OFF

[Disable]

Enable ACPI Auto Conf

Enables or disables BIOS ACPI auto configuration.

Lock Legacy Resources

Enables or disables lock of legacy resources

Security Device Support

Enables or disables BIOS support for security device. O.S will not show
Security Device. TCG EFI protocol and INT1A interface will not be available.

Содержание NSA 5150





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды