background image

Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.

vi

NSA 3180HA User Manual 

Preface

Warranty and RMA

NEXCOM Warranty Period

NEXCOM manufactures products that are new or equivalent to new in 
accordance with industry standard. NEXCOM warrants that products will 
be free from defect in material and workmanship for 2 years, beginning on 
the date of invoice by NEXCOM. HCP series products (Blade Server) which 
are manufactured by NEXCOM are covered by a three year warranty period.

NEXCOM Return Merchandise Authorization (RMA)

 

Customers shall enclose the “NEXCOM RMA Service Form” with the 
returned packages. 

 

Customers must collect all the information about the problems 
encountered and note anything abnormal or, print out any on-screen 
messages, and describe the problems on the “NEXCOM RMA Service 
Form” for the RMA number apply process. 

 

Customers can send back the faulty products with or without accessories 
(manuals, cable, etc.) and any components from the card, such as CPU 
and RAM. If the components were suspected as part of the problems, 
please note clearly which components are included. Otherwise, NEXCOM 
is not responsible for the devices/parts. 

 

Customers are responsible for the safe packaging of defective products, 
making sure it is durable enough to be resistant against further damage 
and deterioration during transportation. In case of damages occurred 
during transportation, the repair is treated as “Out of Warranty.”

 

Any products returned by NEXCOM to other locations besides the 
customers’ site will bear an extra charge and will be billed to the customer.

Repair Service Charges for Out-of-Warranty Products

NEXCOM will charge for out-of-warranty products in two categories, one is 
basic diagnostic fee and another is component (product) fee. 

Repair Service Charges for Out-of-Warranty Products

NEXCOM will charge for out-of-warranty products in two categories, one is 
basic diagnostic fee and another is component (product) fee. 

System Level

 

Component fee: NEXCOM will only charge for main components such as 
SMD chip, BGA chip, etc. Passive components will be repaired for free, 
ex: resistor, capacitor. 

 

Items will be replaced with NEXCOM products if the original one cannot 
be repaired. Ex: motherboard, power supply, etc. 

 

Replace with 3rd party products if needed. 

 

If RMA goods can not be repaired, NEXCOM will return it to the customer 
without any charge.

Board Level

 

Component fee: NEXCOM will only charge for main components, such 
as SMD chip, BGA chip, etc. Passive components will be repaired for free, 
ex: resistors, capacitors. 

 

If RMA goods can not be repaired, NEXCOM will return it to the customer 
without any charge.

Содержание NSA 3180HA









































































Отзывы: