manualshive.com logo in svg

Nexcom NSA 1160, Руководство пользователя

Поделиться
Скачать
Nexcom NSA 1160 Скачать руководство пользователя страница 51

Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.

37

 NSA 1160 Series User Manual 

Chapter 4: BIOS Setup

Hardware Monitor

This section is used to monitor hardware status such as temperature, fan 
speed and voltages.

CPU Temperature

Detects and displays the current CPU temperature.

System Temperature 1, 2 and 3

Detects and displays the current temperature of the system. 

CN2, CN3 and CN5 Fan Speed

Detects and displays the fan speed of CN2, CN3 and CN5.

CPU VCORE to P12V

Detects and displays the output voltages.

Advanced

Version 2.19.1266. Copyright (C) 2018 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Pc Health Status

CPU temperature
System temperature 1
System temperature 2
System temperature 3
CN2 Fan Speed
CN3 Fan Speed
CN5 Fan Speed
CPU VCORE
PVDDR
P3V3
P5V
P12V

:  +37 C
:  +29 C
:  +26 C
:  +18 C
:  N/A
:  5853 RPM
:  N/A
:  +1.072 V
:  +1.200 V
:  +3.286 V
:  +5.060 V
:  +11.904 V

Serial Port Console Redirection

This section is used to configure the serial port that will be used for console
redirection.

Console Redirection

Enables or disables the console redirection. When enabled, Console
Redirection Settings will be available.

Console Redirection Settings

Enters the Console Redirection Settings sub-menu.

Advanced

Version 2.19.1266. Copyright (C) 2018 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Console Redirection Enable 
or Disable

COM0

Console Redirection

Console Redirection Settings

[Enabled]

        

►

Содержание NSA 1160








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды